[time-nuts] FEI FE-5680A Rubidium Pinout
bob.raker at gmail.com
Tue Sep 20 07:13:01 EDT 2005
On 9/20/05, Rex <rexa at sonic.net> wrote:
> On Tue, 20 Sep 2005 00:17:36 -0500, James Meek <JimMeek at sbcglobal.net>
> >Hmmmm. I must have found by ohmmeter the connection between the eeprom
> >and the rubidium via J2-14A, not realizing they were both inputs (as I had
> >concluded that the pinout was non-standard). I not sure about what I
> >found out about the connection of the rubidium serial output, but I seen
> >to recall that it doesn't just end electrically where it does visually,
> >rather "goes underground" through the inner layers of the board and
> >elsewhere in the circuitry.
> I'm sorry. It's late and I don't really understand that. Please tell me
> what you have found connected by underground circuits or (possibly) by
> circuits that I have missed.
> I'm just trying to help here, and I _AM_ the person that figured out
> that the rubidium box needs 5 V. You could still be stumbling trying to
> figure why there is no output.
> Please be specific with any new knowledge or criticism of my help.
> P.S. Have you tried to power it up with the info I just gave you.
> Give me some *facts* with new information or shut up. You are beginning
> to annoy me.
> And **** you very much for not thanking me in the previous message.
> time-nuts mailing list
> time-nuts at febo.com
More information about the time-nuts