[time-nuts] Manual for Sulzer 5A and Lucent Rubidium Reference Oscillator

[Chuck Harris]

If I recall correctly, TVB has the schematics for the Sulzer's on his
website.

-Chuck

Radio Engineer wrote:
> I picked up a Sulzer 5A at Dayton this year, it powers up and the 5 MHz output looks close to spec,  but the 1 MHz,
> and 100KHz divider start intermittantly, quit and don't restart.
> 
> Does anyone on the list have a manual for the 5A?
> 
> I also have a several Rubidium Timming Modules from an obsolete Lucent TDMA base station  (RFG-RB),  has anyone fired
> one of these up before?  They have an Efratom Can on the motherboard, it is an OEM device I have not seen in their
> catalogs before.  I am trying to track down documentation on these as well.  If documentation is available and  I can
> get these running will probably drag these out ot the Hamfests in the Cincinnati area.
> 
> T.R. Stoner  WR4T
> 
>  --------------------------------- Yahoo! Groups gets better. Check out the new email design. Plus there’s much more
> to come. _______________________________________________ time-nuts mailing list time-nuts at febo.com 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>