[time-nuts] Fury Realhamradio listing
SAIDJACK at aol.com
SAIDJACK at aol.com
Sat Apr 28 20:04:20 EDT 2007
In a message dated 4/28/2007 16:49:40 Pacific Daylight Time,
brooke at pacific.net writes:
>The Fury is at:
>http://resco.ucol.mx/Fury/gpsstat.htm
>Tom's Z3801A #4 is at:
>http://www.leapsecond.com/gpscon/gpsstat.htm
>Is the Fury command set the same as the Z3801 or did they add commands for
the
>Fury?
>Have Fun,
Hi Brooke,
thanks for the links!
The Fury uses the standard release GPSCon. It implements a lot of the Z3801A
commands (the ones needed for GPSCon), but follows more closely the
Symmetricom 58503A command set. I think maybe that later versions of GPSCon may have
additional features to control and identify the Fury directly, but this is
not needed due to the Z3801A legacy emulation.
The realhamradio.com site has a link to Colima at the top of the GPSCon
real-time listings. There is also a website link to Jackson-Labs and thus to the
brochure (when clicking on the Fury picture).
Besides the HP legacy commands, there are also a number of additional,
proprietary SCPI commands to give the user full control of all loop parameters,
check voltages, currents, temperatures, etc etc for playing around.
Additionally there is a trace mode feature that can be used to generate data that can be
read-in directly by i.e. Ulrich Bangert's Plotter utility or Stable32. This
uses Windows Hyperterm's capture mode, and pushes data to Hyperterm at
user-selectable intervalls.
bye,
Said
************************************** See what's free at http://www.aol.com.
More information about the time-nuts
mailing list