[time-nuts] more info on bad lcd readout on austron 2100F

[Rob Kimberley]

Daniel

I'm pretty certain I have another 2100F manual available in stock. Happy to
let you have for the cost of the postage (from UK).

Rob K 

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Dan Durgin
Sent: 03 July 2007 20:34
To: time-nuts at febo.com
Subject: Re: [time-nuts] more info on bad lcd readout on austron 2100F
Importance: High

); SAEximRunCond expanded to false
Errors-To:
time-nuts-bounces+rk=timing-consultants.com+rk=timing-consultants.com at febo.c
om

I did some more investigating over the weekend on my bad lcd on the 2100F
Austron Loran unit.
 The LCD has 76 (!) pins, and appears to be soldered in place.... 8 digits
with colons and +- signs can just be made out when looked at just the right
angle. Edges of digits all jaggy and broken, as if liquid flowed and gone
bye-bye. Backpanel lighting still operating but barely visible. Anyone have
a manual with a part number? I sure dread desoldering all those pins, but
what else to do?
Daniel Durgin
Ocean View, Hawaii
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.9.10/875 - Release Date: 6/27/2007
9:08 PM


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.