[time-nuts] Frequency counter recommendations

[Richard W. Solomon]

I bought two of the HP 5334 on e-Pay and was pleasantly surprised
when I found that one had the 1.2 GHz Pre-Scaler and HP 10811 Time
Base in it. The other became an organ donor.

73, Dick, W1KSZ

-----Original Message-----
>From: David Dameron <ddameron at earthlink.net>
>Sent: Mar 20, 2007 2:24 AM
>To: time-nuts at febo.com
>Subject: [time-nuts] Frequency counter recommendations
>
>Hi all,
>I have a run-of-the-mill frequency counter (8 digits, 0.1 and 1.0 sec gate,
>no reference oscillator output or ext. input) and would like to upgrade to
>something better. I would initially like to measure frequencies in the 10
>MHz or below range with a resolution of better than 0.1 Hz.
>From reading this list have picked out a HP 5334 or a Racal-Dana 1991/1992.
>Some of these have been recently on ebay, but that is not my preferred
>source, the seller often does not state the options installed, as well as
>the typical ebay problems.
>
>Are there others someone would recommend, used?
>-Dave D.
>
>
>
>
>
>_______________________________________________
>time-nuts mailing list
>time-nuts at febo.com
>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts