[time-nuts] FMT

[Connie Marshall]

Hi Didier,

Good to hear from you. Sounds like you did fine considering how bad condx
were that night.

I will send out an email on the time and frequency. I think it will be
Thursday night this week, but not sure yet.

Thanks for participating and have a good weekend

73

Connie
K5CM

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
Behalf Of Didier Juges
Sent: Saturday, May 26, 2007 8:11 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] FMT


Well, I was too late sending my results, but I did manage to listen to
the signals this past Wednesday.

I did not have time to prepare anything but listening by ear on the
FT-1000 and using the HP-3586A as a beat generator (free running off
it's internal Ovenair precision OCXO), I managed to get within 0.4 Hz on
40 m and 0.2 Hz on 80m (good signals). I was off by 1.5 Hz on 20m, where
the signal was very weak with QSB, and I did not hear anything on 17m.

Thanks Connie, I will try to be better prepared next week (hooked to GPS
and using Spectrum Lab).

Didier KO4BB


_______________________________________________
time-nuts mailing list
time-nuts at febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts