[time-nuts] Z3801
Connie Marshall
connie.marshall at suddenlink.net
Fri Apr 11 14:50:58 EDT 2008
Great info Nigel!!! I will go ahead and try to get the necessary voltages
with external supplies to see if the mother board is functional then if so,
I will try to fix/rebuild the PSU module.
Connie
k5cm
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
Behalf Of GandalfG8 at aol.com
Sent: Friday, April 11, 2008 12:35 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] Z3801
In a message dated 11/04/2008 17:57:31 GMT Daylight Time,
connie.marshall at suddenlink.net writes:
Looks like my HP-Z3801 got zapped in the lighting storm last night. The
Voltage Converter Assembly appears to be bad. Not yet sure if it got the
mother board also. Are there schematics out there, and can you get
replacement parts for the DC to DC converter package. I have searched the
K8CU pages and of course have the user manual. Would it be possible to
supply the 5/15/-15 volts from and external supply or would that have an
adverse effect on the performance of the oven and oscillator.
------------------------
Hi Connie
I'm sorry to hear your bad news, let's hope it didn't get the motherboard
too:-(
I've been looking for a spare PSU module for quite a while now without
success.
I did think of just building a separate PSU but was a bit wary as the outer
oven controller is on the power module and I wasn't sure what that
involved.
However, I recently came across this web page, which you might find
useful...
_http://homepage.sunrise.ch/mysunrise/shegnauer/Z3801A/Power%20Supply/z3801a
_p
ower_supply.htm_
(http://homepage.sunrise.ch/mysunrise/shegnauer/Z3801A/Power%20Supply/z3801a
_power_supply.htm)
regards
Nigel
GM8PZR
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list