[time-nuts] HP 5062C service manual, schematics, or power supply troubleshooting tips

Dave 'SqueezeBox' Carlson dgcarlson at sbcglobal.net
Tue Aug 19 17:33:11 EDT 2008


very typical of the 5062C regulator board. IF run long enough, the PCB can 
actually de-laminate or crumble when removed. Run very hot and little 
circulation in the honey-comb structure.

Dave

----- Original Message ----- 
From: "Tim Schulz" <technoid_tim at comcast.net>
To: <time-nuts at febo.com>
Sent: Tuesday, August 19, 2008 11:09 AM
Subject: [time-nuts] HP 5062C service manual, schematics, or power supply 
troubleshooting tips


Greetings, I am new to the list - I have an HP5062C Cesium Beam standard
whose 18v power supply has died.  I pulled the 18v regulator board out
and it's pretty discolored from running hot.  I don't know if there is a
short on the 18v bus that caused the failure, or if its the regulator
board itself.  I have done lots of internet searches but have not found
a service manual for sale yet, only the HP Journal issue on the
standard.  I do have the operations manual in PDF form.

Many thanks, Tim Schulz...

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there. 




More information about the time-nuts mailing list