[time-nuts] Wenzel Associates 100 Mhz osc
n3izn at aol.com
n3izn at aol.com
Wed Dec 3 18:33:35 UTC 2008
I have some drive time so I might give Wenzel a call and see how it goes.
Meanwhile I looked around some more and found some with PTI oscillators. The pins are laid out in a square where as the Wenzel unit is in a straight row. The attached cable is the same with the same colors so I'm going to guess I can find the power and control leads. I'll make a test set up and start playing.
Got a few questions.
When it says 12 volts, most times 13.8~ 14 should be fine? These are labeled 12 volts.
Will that 12 volts need to be regulated?
Do the specs look?decent?
Here is a link to the PTI unit.?
http://www.mtronpti.com/pdf/xo5051_datasheet51607.pdf
Thanks
Chris
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com] On Behalf Of n3izn at aol.com
> Sent: Monday, December 01, 2008 2:00 PM
> To: time-nuts at febo.com
> Subject: [time-nuts] Wenzel Associates 100 Mhz osc
>
> I stumbled across a 100 Mhz oscillator. It comes from a
> Harris Constellation RX/TX.
>
> According to the website part number is proprietary. So I
> thought I would ask here or any info.
>
> Here is what is printed on it from top to bottom.
>
> 500-06769D
> ISSUE 02
> PPD 786-020590-053
> 100 Mhz
> +12 VDC
> 0105-0201SSRG
>
> It has a SMA female or 100 Mhz out and 4 pins for power and AFC?
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe,
> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list