[time-nuts] PCB costs and suggestions for suppliers

[Harry Hindriks]

Hi David,

You can try www.eurocircuits.com

A quick calculation for your board gives 137 Euro plus tax, but including
delivery.

Regards,
Harry Hindriks



-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of David C. Partridge
Sent: dinsdag 8 juli 2008 18:50
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] PCB costs and suggestions for suppliers

I'm looking to get a PCB made up for my frequency divider circuit.   I'm
based in the UK.   So far the best price I've found is about 160 Euro plus
tax and delivery for one 5" (127mm) by 3.5" (88.9mm) 4-layer board (from
PCB-Pool).   As I've not had a PCB made up in the last twenty odd years, I
don't know if this is typical, or whether I should be able to get a better
price.

I tried setting it up as a two layer board, but it was far too much pain - I
wanted an unbroken ground plane, and couldn't come up with a workable
routing.

If I get it made in the USA, the saving will need to be significant to cover
the additional shipping costs and UK import duty, tax and handling charges.

Any guidance on where to go, and what level of pricing I should expect is
greatly appreciated.

Cheers,
David Partridge


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.