steve65 at suddenlink.net
Wed Jun 4 21:49:49 EDT 2008
I have long had a Thunderbolt with the power connector on the rear and
found a Trimble web page for it.
However, the unit I acquired through the time-nuts buy has the power
connector on top and it's a different connector. Is there a web page
detailing that Thunderbolt configuration?
Magnus Danielson wrote:
> Hi fellow time-nuts!
> I received my Thunderbolts Monday, but I was delayed until this evening (no
> worries, time-nuts related delay) to crimp the power and hook it up.
> The wrong wire was bent away, but since the colours did not match the webpage I
> got curious. Once that was cleared up it was a simple task to get things
> together. Really a great kit!
> It fired up nicely. Came up on COM2 rather than COM1, but I can live with that.
> I was wondering if someone could shed some light on how the tboltmon can be
> able to log the measuements form a 53132 and what the setup there could be.
> I don't have a 53132 but the CNT-90 has a 53132 compatibility mode... but it
> does not grey out the controls for that. How do I get that cooking?
> Trimble's site seems not to provide all the info any more. If someone has the
> appnotes etc. I would apprechiate that. Basically any info beyond the manual
> and tboltmon which had alternative links from tom's page.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
Read The Patriot It's Right -- It's Free
http://PatriotPost.US/subscribe/ Veritas vos Liberabit
More information about the time-nuts