[time-nuts] Thunderbolt Group Buy PS

Steve steve65 at suddenlink.net
Fri Jun 13 22:47:04 EDT 2008

I might try that too . . . except that the Thunderbolt has a 
MiniCircuits ZFSC-2-1 splitter mounted on top, just above the DB9. The 
splitter appears to be bolted from inside of the Thunderbolt, so the 
Thunderbolt will have to be disassembled to remove the splitter.

Anyone taken a Thunderbolt apart? At first examination, it appears that 
six screws should allow the two pieces of the enclosure to separate. Any 
pitfalls or gotchas? Advice?


Steve K8JQ

Didier Juges wrote:
> Here is how I *glued* the AllElectronics power supply to the top of the
> Thunderbolt and shortened the cable for a neat, compact package. I connected
> the chassis wire of the power supply to the TB case.
> http://www.ko4bb.com/Test_Equipment/Thunderbolt/group_buy/
> The power supply is the exact same length as the TB, just the strain relief
> for the DC Out cable sticks out a lot, so I cut it and removed the cable
> jacket.
> Didier KO4BB
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

Read The Patriot   It's Right -- It's Free
http://PatriotPost.US/subscribe/ Veritas vos Liberabit

More information about the time-nuts mailing list