[time-nuts] Firmware bug /TRAK

[Stanley Reynolds]

Bill

Close to my measurements 2 5/8 by 6 3/8 USA with a metal shield box on antenna connector end 2 1/2 by 2 1/2. 20 Pin connector on the diagonal edge from the antenna connector. Unable to read numbers as the interface board with backup battery is mounted on top. Think it does match Björn's post script files which explains the need for an extra voltage regulator for 7 volts. Has a green led about center of the board. Magnovox GPS engine Trade Mark across the short antenna connector end of board. Thanks Björn for the files.

Stanley






________________________________
From: "brice at weaponeer.com" <brice at weaponeer.com>
To: time-nuts at febo.com
Sent: Saturday, November 1, 2008 5:23:35 PM
Subject: Re: [time-nuts] Firmware bug /TRAK

I found the Magnavox board I have. Magnavox GPS Engine,meauures about 6.5 x 2.5 inches. 900578-801-6 / 40613463 (looks like) E320R
basicly, 900578. Came out of some oilfield electro-junk I bought from Exxon Houston a few years ago. Same thing????? Cheers, Bill

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.