[time-nuts] COMPLETELY off topic - but I know you'll read it anyway.

[Poul-Henning Kamp]

In message <f616e0f80810110510p4e8e1a1fw932acf8093cc38ea at mail.gmail.com>, "Jim 
Palfreyman" writes:

>Do I run each 8 ohm speaker on its own 500W channel?
>
>or
>
>Do I run in bridged mode and put the two speakers in parallel onto the 1000W
>amplifier?

Unless the two speakers are _very_ identical, including length and type
of cabling from the amplifier, I will recommend against running them in
parallel.

As former sound technician I will also say this: run them on separate
channels, if you loose one channel, you don't loose your sound entirely.

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.