[time-nuts] LPRO in TM500

[Corby Dawson]

Dave,

The modules I was built went  into the TM501 single slot frame.

I used the line voltage jumper to raise the voltage from the bridge a
bit.

I also used a 6800uF capacitor on the bridge output.

I used an LM317 regulator and set its output at 22VDC.

Hope this helps!

Corby
____________________________________________________________
Senior Assisted Living
Put your loved ones in good hands with quality senior assisted living. Click now!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=3uVaP8UD0KwEmh0Q44jQcgAAJ1ABLZFyqoH-WnHH1GJ345whAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASUQAAAAA=