[time-nuts] DIY Frequency extension for HP Agilent 53181A, 53131A or 53181A

[Samuel D. [x86/CPC]]

> If you download the 53132A component level information manual from the  
> Agilent site you'll find a schematic of the channel 3 board with  values
and J2 
> pinout. The 53131A version of this manual doesn't seem to include this.

Excellent ! I only checked the 53131A datasheet without success.

I'm checking the schematics...




-----Message d'origine-----
De : time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] De la
part de GandalfG8 at aol.com
Envoyé : dimanche 15 février 2009 18:42
À : time-nuts at febo.com
Objet : Re: [time-nuts] DIY Frequency extension for HP Agilent 53181A,
53131A or 53181A

 
In a message dated 15/02/2009 17:05:21 GMT Standard Time, sam at canardpc.com  
writes:

- What's  the divider ratio used ? Perhaps /16 for 3 GHz, /32 for 5 GHz, and
/64 for  12.4 GHz, but we really need to be sure.
- What's the gain of each one of  the four amplifiers present ?
- How does the counter aware about the option  used ? There is no
"intelligence" on the option board, so, the counter may  detect the type of
prescaler with some pull-up or pull-down resistors  somewhere.
- What is the exact pinout for the J2 connector ?

In  order to get an answer, we need to find somebody with a genuine  option
board willing to spend an hour for the project...  



-------------------
If you download the 53132A component level information manual from the  
Agilent site you'll find a schematic of the channel 3 board with  values and
J2 
pinout.
The 53131A version of this manual doesn't seem to include this.
 
regards
 
Nigel
GM8PZR
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.