[time-nuts] 1" 14 tpi UNS die

[bg at lysator.liu.se]

Hi Dave,

Check with your local "plumbing"-store. In Sweden the "old inch based pipe
thread" lives on, slightly renamed. Se attached .jpg for approximate
inside/outside diameters.

The pipes are sold in 6m lenghts threaded in both ends.

Good luck in your search!

--
   Björn



> Panasonic VIC-100 GPS antenna ...
>
> Dave
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Chuck Harris
> Sent: 07 July 2009 13:07
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] 1" 14 tpi UNS die
>
> I don't recognize the size you are asking for.  What is your application?
>
> -Chuck Harris
>
> David C. Partridge wrote:
>> Does anyone (preferably in the UK) have 1.0-14UNS-2A thread cutting
>> die they would be prepared to lend me (preferably a die nut type as I
>> don't have a die stock)?
>>
>> Thanks
>> David Partridge
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pipe_dimentions.jpg
Type: image/jpeg
Size: 40348 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/time-nuts/attachments/20090707/1cfefbac/attachment-0001.jpg>