[time-nuts] Source for Trimble Acutime 2000 Connectors?
Robert Atkinson
robert8rpi at yahoo.co.uk
Tue Jul 14 12:17:14 UTC 2009
Hi,
This is the same as the palisade connector.
Search the list for pallisade and or g8rpi for an earlier answer.
Robert G8RPI.
--- On Tue, 14/7/09, Skip Withrow <swithrow at idcomm.com> wrote:
> From: Skip Withrow <swithrow at idcomm.com>
> Subject: [time-nuts] Source for Trimble Acutime 2000 Connectors?
> To: time-nuts at febo.com
> Date: Tuesday, 14 July, 2009, 4:09 AM
>
> Hello Time-nuts,
> I'm looking for the connector to mate with a Trimble
> Acutime 2000. The connector part number is Deutch MMP
> 26C-2212S1, pins are 6862-201-22278, and back shell is
> 6810-204-2001.
> I've tried the usual - Mouser, Digi-Key, and Newark.
> Who is their distributor in the US?
> I would even take a used connector cut-off (or not cut off
> the cable even) if someone had one laying around the shop.
> Any help appreciated.
> Regards,
> Skip Withrow
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list