[time-nuts] PCB connector for a 10811A

Ed Palmer ed_palmer at sasktel.net
Thu Mar 12 04:20:05 UTC 2009

Hi Steve,

The connectors aren't that hard to find.  Look for 15 position, 2 sided 
(therefore 30 contacts), 0.156" pin spacing for a board thickness of 
about 0.067".  I picked up a couple from Digikey a year or so ago for my 
10544A.  Digikey Part # EDC305302-ND.  They're from EDAC - part 
#305-030-520-202.  But you should look through the (many) options like 
wirewrap, solder, right-angle, etc. to get what you need.


Steve Rooke wrote:
> I've been trying to find out where I can purchase a connector for a
> 10811A but with little success. From the manual it is listed as a
> CINCH 250-15-30-210 but searching for that does not turn up anything.
> I expect that it's going to be as easy to find as hens teeth over here
> in New Zealand but I was hoping to find a supplier, say, in the US who
> would ship to here. Anyone know where I should look for this please?
> Thanks, Steve

More information about the time-nuts mailing list