[time-nuts] HP E2050A LAN/HPIB Gateway

Chad Simpson analogaficionado at gmail.com
Wed Sep 2 07:27:49 UTC 2009


Matt, I would be very interested in the python code.  I got a good deal on
the E2050A, and though I haven't set it up yet, I imagine it works the same
as the E5810A, just without the DHCP and web config features.

Adrian, I don't have the full manual, but I emailed you the "Installation
and Configuration" guide pdf.  If anyone else would like a copy, just let me
know...

- Chad.


On Tue, Sep 1, 2009 at 3:53 PM, Matt Ettus <boyscout at gmail.com> wrote:

> We don't use the NI stuff at all.  We have our own
> SCPI-over-GPIB-over-VXI11-over-TCP/IP code all in python, based around
> some code off of sourceforge.  We use it exclusively with the E5810A
> which is great.  It also works with the Prologix USB device, and if
> you have the right magic kernel incantations the GPIB-USB-B from NI.
> It would probably also work with the GPIB-ethernet gateway from ICS
> electronics which is also VXI11 like the E5810A, but about 25%
> cheaper.
>
> Matt
>
>
> On Tue, Sep 1, 2009 at 12:32 PM, Lester Veenstra<m0ycm at veenstras.com>
> wrote:
> > Matt:
> >    You caught my interest with the "Python".   Do you have a Python
> > interface to the NI GPIB drivers, or some other way to bet from Python to
> > GPIB.   I have been looking but not found such a beast, and was
> > contemplating writing it in C the hard way. But I suspect some one has
> been
> > there before me. ???
> >   73
> >      Les
> >
> >
> > Lester B Veenstra  MØYCM K1YCM
> > lester at veenstras.com
> > m0ycm at veenstras.com
> > k1ycm at veenstras.com
> >
> >
> > US Postal Address:
> > PSC 45 Box 781
> > APO AE 09468 USA
> >
> > UK Postal Address:
> > Dawn Cottage
> > Norwood, Harrogate
> > HG3 1SD, UK
> >
> > Telephones:
> > Office:     +44-(0)1423-846-385
> > Home:     +44-(0)1943-880-963
> > Guam Cell: +1-671-788-5654
> > UK Cell:   +44-(0)7716-298-224
> > US Cell:   +1-240-425-7335
> > Jamaica:  +1-876-352-7504
> >
> > This e-mail and any documents attached hereto contain confidential or
> > privileged information. The information is intended to be for use only by
> > the individual or entity to whom they are addressed. If you are not the
> > intended recipient or the person responsible for delivering the e-mail to
> > the intended recipient, be aware that any disclosure, copying,
> distribution
> > or use of the contents of this e-mail or any documents attached hereto is
> > prohibited.
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> > Behalf Of Matt Ettus
> > Sent: Tuesday, September 01, 2009 7:14 PM
> > To: Discussion of precise time and frequency measurement
> > Subject: Re: [time-nuts] HP E2050A LAN/HPIB Gateway
> >
> > ....have full python code for .....
> >
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list