[time-nuts] Small DMTD project PCBs Group Buy Update

[Eric Garner]

I'd like to put my order in for 3 PICTIC boards, 2 Mixer boards and 2
DDS boards.

thanks,

Eric

On Wed, Aug 18, 2010 at 9:27 PM, Stanley Reynolds
<stanley_reynolds at yahoo.com> wrote:
> Just boards, 5 times 9.00 = $45 mailed payment  $47.5 Paypal
> two pictic, one DDS board, two mixer boards, note the PDF talks about a 3rd
> pictic as an option.
>
> If you had another offset source no need for the DDS board. If you have Time
> interval counters that are interfaced to a computer then no need for the PicTic
> boards. Guess you could use the DDS board for other projects also.
>
> Each mixer board has two identical channels so it would be possible to use just
> one in some applications.
>
> I 'm offering the boards in any combination.
>
> Stanley
>
>
>
>
> ________________________________
> From: Eric Garner <garnere at gmail.com>
> To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
> Sent: Wed, August 18, 2010 10:58:36 PM
> Subject: Re: [time-nuts] Small DMTD project PCBs Group Buy Update
>
> Just to be clear, the ~48 dollar total includes all of the required boards(
> minus components) needed to make the dmtd setup work?
>
> Thanks,
> Eric
>
> Sent from my Banana Jr. mobile device
>
> On Aug 18, 2010, at 1:50 PM, Stanley Reynolds <stanley_reynolds at yahoo.com>
> wrote:
>
>> Will place order in the next few days please email me with any suggested
>>changes
>> to the mixer or DDS boards.
>>
>> Stanley
>>
>>
>>
>> ________________________________
>> From: Stanley Reynolds <stanley_reynolds at yahoo.com>
>> To: time-nuts at febo.com
>> Sent: Sun, August 15, 2010 3:14:50 PM
>> Subject: [time-nuts] Small DMTD project PCBs Group Buy
>>
>> Any interest in boards at 8 USD each as before ?
>>
>> The project would require 2 or 3 pictic boards, 2 mixer boards, and 1 DDS
>>board.
>>
>>
>>
>> 5 boards plus shipping about 47.50 usd
>>
>> Please email me off list with your interest.
>>
>> I not sure if using the pictic II vs I board will present problems for the
>> software.
>>
>> Would also like to workout any changes to the DDS or Mixer Boards before I
>>place
>>
>> the order.
>>
>> Yes I still have PICTIC II boards from the first order and other parts for
>>them.
>>
>> Stanley
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



-- 
--Eric
_________________________________________
Eric Garner