[time-nuts] 4 KV Power Supply Recommendations
J. L. Trantham
jltran at worldnet.att.net
Mon Jan 25 01:50:19 UTC 2010
Weekend Update.
As of this evening, the voltage on pin 4 is -0.811 VDC and the HV is 2313
VDC.
The progress has been start and stop but a steady trend in the right
direction. The voltage on pin 4 (that needs to get to 4 VDC in order to
turn on the CS Oven) has remained relatively stable at -0.253 VDC. It was
-0.263 on the morning of the 19th.
Any predictions as to whether this will come on line without going to a
higher voltage/higher current supply?
Rather than building an HV power supply this weekend, I spent the entire
weekend cleaning up the work shop. I can now WALK in the shop.
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of J. L. Trantham
Sent: Monday, January 18, 2010 8:41 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 4 KV Power Supply Recommendations
This morning, -0.995 VDC and 2181 VDC. Progress!
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of J. L. Trantham
Sent: Sunday, January 17, 2010 9:14 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 4 KV Power Supply Recommendations
This evening, the voltage on pin 4 is -1.039 VDC and the HV is up to 2151
VDC.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list