[time-nuts] Pic programing for the PICTIC II
J. L. Trantham
jltran at att.net
Fri Jul 2 23:47:15 UTC 2010
Stanley,
I had sent you an email off list requesting the 4 boards. First was for 2
than an update changing it to 4. Didn't want to get a 'double order'.
I can easily order the parts via Mouser. The 'link' to the project looks
good. However, I anticipate the need for some help with the programming but
I look forward to trying to learn the nuts and bolts of this.
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Stanley Reynolds
Sent: Friday, July 02, 2010 7:28 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Joe,
Will add you to my list for boards, perhaps someone else here can help with
the
PIC chips.
Stanley
----- Original Message ----
From: J. L. Trantham <jltran at att.net>
To: Discussion of precise time and frequency measurement
<time-nuts at febo.com>
Sent: Fri, July 2, 2010 6:33:56 PM
Subject: Re: [time-nuts] Pic programing for the PICTIC II
I requested 4 boards and I will need 4 of the 16F688's. However, one of my
goals for this is to learn to do the programming. Therefore, getting some
'pre-programmed' chips to compare with my own programmed chips will be very
helpful.
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Stanley Reynolds
Sent: Friday, July 02, 2010 10:37 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Pic programing for the PICTIC II
----- Original Message ----
From: paul swed <paulswedb at gmail.com>
To: Discussion of precise time and frequency measurement
<time-nuts at febo.com>
Sent: Fri, July 2, 2010 10:27:26 AM
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Whats your board count so far??
23 people my guess is 40-50 boards
Better ?
How many16f688s are we talking here?
My thinking is less than 10 as only two people have asked. Don't know how
many have not asked.
Thanks
<snip>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list