[time-nuts] GPS antenna splitters

[paul swed]

Well just to get the conversation really going. In the US we have a store
called home depot and they and others carry TV antenna splitters with DC
pass through on one leg good to 2.5 Ghz for about $10. Been using one for at
least 2-3 years works just fine.
Certainly this is evil and suspect I will here about it. But it sure works.
Additionally I use 75 ohm TV coax cable from the tower to my systems some 50
odd feet. This is 1/2" hardline very low loss. Available from cable tv
companies for $0.
So my hole feed system is 75 ohm with a swr of about 1.4-1 due to the
impedance mismatch.
Pretty darn good.
Good luck

On Fri, Mar 26, 2010 at 4:09 PM, Ruifeng Xi <ruifeng at sgl.com> wrote:

> Hi, Ashley
>
> Only used ones? Otherwise, check
>
> http://gpsnetworking.com/GPS-antenna-splitters.asp
>
> You can find two way, four way splitter with/without External Power Supply.
> ......
>
>
>
> On 3/26/2010 3:47 PM, ashley40 at aol.com wrote:
>
>> Hi Everyone........
>>         After a lot of learning, sweating (yes, girls do sweat), hand
>> wringing, and a LOT of emails and great help , we have two of Mr Miller
>> (G3RUH) GPSDO units up and working fine. Disciplined 10mhz all over the
>> place.
>>
>>       Now what we need is a GPS antenna splitter..... Soooooooooooo, we're
>> looking for links, do-it-yourself articles, hints from you guys who have
>> built them...... Ebay is really barren for these things, only one or two
>> listed, but I thought we would try Time Nuts first and see ...........
>>
>>         Thank you everyone for all of your help with this GPSDO project !!
>>
>> Ashley
>>
>>
>>
>>
>>
>> Thank You
>> Kiss-Electronics
>> Ms Ashley Hall
>> 183 N 5th Avenue
>> Cornelius, Oregon
>> 97113
>>
>>
>> W7DUZ
>>
>>
>> www.kiss-electronics.com
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>>
>>
>
>
> =========================================
> Ruifeng
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>