[time-nuts] Getting Started in High Precision Timing

[Stanley Reynolds]

Matt,

As a follow up just ran across this which is good to get started with :
http://www.wriley.com/Examples%20of%201%20PPS%20Clock%20Measuring%20Systems.pdf

In fact Mr. Riley has a very good selection of material at :
http://www.wriley.com/#papers

Stanley



----- Original Message ----
From: Matt Davis <mattdavis9 at gmail.com>
To: time-nuts at febo.com
Sent: Mon, November 15, 2010 7:31:42 AM
Subject: [time-nuts] Getting Started in High Precision Timing

Hello all,
I have been a software hacker for years but have never really done too
much hardware hacking.  I have been looking at oxco modules, but the
data sheets of various vendors do not really provide me with a good
basis as to what such an oscillator would provide me.  I assume its
just oscillation given the given frequency.  Do any of you all have
any good links/resources aside from what a basic google would provide,
as to how to get the data from the oscillator at a pulse-per-second
rate allowing me to do some basic timing.  Really, I'm just looking
for some first steps in hacking on these high-precision oscillators.

Thanks

-Matt

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.