[time-nuts] Eprom programmer

[J. L. Trantham]

Thanks for the update.  I'll go download the images just in case I need them
for my 5372.

I have been playing with several different programmers as I learn this
craft.  The take home lesson so far has been if you are dealing with
'precious data', use a programmer that is specific for your chip. 

To further test the programmer, take your saved file and program a new set
of EPROM's and see if they work in your equipment.  If so, sounds like you
did it correctly.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Geraldo Lino de Campos
Sent: Sunday, April 17, 2011 8:49 PM
To: time-nuts at febo.com
Subject: [time-nuts] Eprom programmer


I received the programmer recently. The software installed without a glitch,
and is easy to use. It came with a large number of devices, and operates
without jumpers or other manual settings.

I only used it to read the 5373 eproms, and it worked correctly - I hope.

J. L. Trantham wrote:

Thanks.

Would love to hear how it works.

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
On Behalf Of Geraldo Lino de Campos
Sent: Sunday, February 13, 2011 1:03 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] Looking for 5372 boards


Willem Programmer PRO GQ-4X

Geraldo,

Just curious which EPROM programmer you purchased?

Joe



-- 
------------------------------------
Geraldo

-- 
------------------------------------
Geraldo Lino de Campos
geraldo at decampos.net _______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.