[time-nuts] LH v3.0 Beta and Z3816A Question

paul swed paulswedb at gmail.com
Tue Jan 18 23:17:58 UTC 2011


tnx

On Tue, Jan 18, 2011 at 5:49 PM, John Miles <jmiles at pop.net> wrote:

> No, not at this time.  It would take a lot of hacking.
>
> -- john, KE5FX
>
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> > Behalf Of paul swed
> > Sent: Tuesday, January 18, 2011 2:18 PM
> > To: Discussion of precise time and frequency measurement
> > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
> >
> >
> > A quick question
> > I thought lady heather was a Tbolt program only.
> > Does it work with other GPSDP like the hp 3801 etc???
> > Thanks
> >
> > On Tue, Jan 18, 2011 at 9:20 AM, J. L. Trantham <jltran at att.net> wrote:
> >
> > > The Z3816A responded to the command nicely.  I was also able to use the
> > > command:
> > >        *tst?
> > > to reboot the receiver without having to turn off the Z3816A.  This was
> > > using Symmetricom SatStat v5.0.  I have not tried with HP SatStat v4.2.
> > >
> > > Initially, the time was off by what appeared to be the leap second
> value
> > > with a TFOM of 6.  Now it is back to a TFOM of 3 and the time appears
> > > correct.
> > >
> > > Thanks,
> > >
> > > Joe
> > >
> > > -----Original Message-----
> > > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> > > Behalf Of J. L. Trantham
> > > Sent: Tuesday, January 18, 2011 6:36 AM
> > > To: 'Discussion of precise time and frequency measurement'
> > > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
> > >
> > >
> > > Michael,
> > >
> > > Thanks for the hint.  I've looked at that site a thousand times
> > but never
> > > found that hint until now.  I'll give it a try.
> > >
> > > Thanks again.
> > >
> > > Joe
> > >
> > > -----Original Message-----
> > > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On
> > > Behalf Of cook michael
> > > Sent: Tuesday, January 18, 2011 2:20 AM
> > > To: time-nuts at febo.com
> > > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question
> > >
> > >
> > > Le 18/01/2011 05:07, J. L. Trantham a écrit :
> > > > An unrelated question.  My Z3816A reports GPS time.  I have looked
> but
> > > > have not found a command to make it switch to UTC.  Does such a
> > > > command exist? If so, what is it?
> > > >
> > > The command to do the same on the Z3801A might work with this
> > box aswell.
> > >
> > > Using info from K8CU;
> > > http://www.realhamradio.com/GPS_Frequency_Standard.htm
> > >
> > > Issue the command:
> > >
> > >    :diag:gps:utc?
> > >
> > > If it returns 0 you are in GPS mode; if 1 you are in UTC
> > >
> > > Use the command:
> > >
> > >    :diag:gps:utc 1
> > >
> > > followed by
> > >
> > >        :syst:pon
> > >
> > > to set it to UTC mode.  Some units have to be powered off to
> > actually reset
> > > to UTC depending on software version.
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 9.0.872 / Virus Database: 271.1.1/3386 - Release Date:
> 01/17/11
> > > 01:34:00
> > >
> > >
> > > _______________________________________________
> > > time-nuts mailing list -- time-nuts at febo.com
> > > To unsubscribe, go to
> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > > and follow the instructions there.
> > >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list