[time-nuts] Fwd: Re: Lucent GPS and RB pair

[Randy D. Hunt]

-------- Original Message --------
Subject: 	Re: [time-nuts] Lucent GPS and RB pair
Date: 	Mon, 20 Aug 2012 10:00:29 -0700
From: 	Randy D. Hunt <randy_hunt960 at yahoo.com>
To: 	Discussion of precise time and frequency measurement 
<time-nuts at febo.com>



On 8/20/2012 9:09 AM, paul swed wrote:
> Asking the wrong guy.
> No clue
> Regards
> Paul
>
> On Sun, Aug 19, 2012 at 11:09 PM, Tom Knox <actast at hotmail.com> wrote:
>
>> Hi Paul;
>> Has anyone played with these Lucent units much to see if LH could be
>> tweaked to work?
>> Thanks;
>> Thomas Knox
>>
>>
>>
>>> Date: Sun, 19 Aug 2012 22:44:38 -0400
>>> From: paulswedb at gmail.com
>>> To: time-nuts at febo.com
>>> Subject: Re: [time-nuts] Lucent GPS and RB pair
>>>
>>> Boy do I agree with Bobs comment.
>>> But I have several of the lucent RBs and at least most of mine are quite
>>> old. Hey $20 you can't really argue. Or as they say you get what you pay
>>> for.
>>> So reasonable is a curious question. Or a caution.
>>> By the way I am not at all complaining actually.
>>> Regards
>>> Paul.
>>> WB8TSL
>>>
>>>
>>> On Sun, Aug 19, 2012 at 9:13 PM, Bob Camp <lists at rtty.us> wrote:
>>>
>>>> Hi
>>>>
>>>> Compared to the other two, there is a lot less support for the RFTG
>> parts.
>>>> Lady Heather is a *very* good reason to use a TBolt.
>>>>
>>>> Bob
>>>>
>>>> On Aug 19, 2012, at 9:06 PM, Jerry <jsternmd at att.net> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I am looking for opinions on the RFT Gm II- XO and RFT Gm II- RB
>>>> combination
>>>>> compared to TBolt or HP 3815A.  I can get the Lucent pair at a very
>>>>> reasonable price.  Are manuals easily obtained for them?
>>>>>
>>>>> Thanks
>>>>> Jerry
>>>>> K1JOS
>>>>> _______________________________________________
>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>>> and follow the instructions there.
>>>>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
list:

I don't know about LH.  But the Lucent software is out there. It just
takes some searching to find it.  I have it around here somewhere.  I
moved in Feb and still have not got the bench set up. There is some
documentation out there too.  Just takes some hunting to find it. Check
to archives of this list for a lot of it.  I have a pair that that had
been running 24x7 for about 9 months. no problems.  Hope this helps.

Randy, KI6WAS