[time-nuts] newbie question Thunderbolt supply
Bob Camp
lists at rtty.us
Sun Aug 26 01:11:59 UTC 2012
Hi
The -12 runs the RS-232 and the negative supply to the DAC buffer. As long as it's past about -7V everything works pretty well. With no negative supply the DAC may have issues. Most of the OCXO"s run right around 0V….
Bob
On Aug 25, 2012, at 8:55 PM, Hal Murray <hmurray at megapathdsl.net> wrote:
>
> lists at rtty.us said:
>> The -12 supply is very low current and does not matter much.
>
> Is the -12 used only for the RS-232, or is it also the negative supply to the
> DAC? If the latter, the regulation and noise may be important.
>
> I think I remember comments about it being used by the DAC. Wasn't there
> some mention of the TBolt working with a dead -12 supply, but only as long as
> the DAC output was above 0.
>
>
>
> --
> These are my opinions. I hate spam.
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list