[time-nuts] SSR-6t Connector

Dale J. Robertson dale at nap-us.com
Fri Dec 21 21:51:46 UTC 2012


Though the $35 special is only good for 1 unit per person,
Synergy offers a 10% educational/ham radio/experimenter discount for 
additional/subsequent units
bringing the price to around $63 for time-nuts who need more than 1. I'm 
thinking the other unit they have announced (without the PIC) should be even 
cheaper. Maybe if we are real nice they will offer a single unit special 
price on that one when it comes out early next year.
Dale NV8U


-----Original Message----- 
From: Don Latham
Sent: Friday, December 21, 2012 1:59 PM
To: Tom Van Baak ; Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] SSR-6t Connector

Had a good conversation with Art Slepin at Synergy. He said, if my
ancient memory serves, that the PIC on the new board will be available
for programming, and that it might be possible to do an ONCORE as a
software conversion from the UBLOX to the output connector. Just who is
going to do this, not sure. But it will be possible.
The newer versions of the SST will be programmable through the serial
port. At present, the extra side port on the board is a programming
connector.  The info will be on Synergy's SST website. Even at $70 per,
a UBLOX timer and PIC on the same board might be very cost-effective for
all sorts of fooling around!
Don

Tom Van Baak
> Hi Paul,
>
> I'm pretty sure the hp Z3801A and 58503A/B (and perhaps other 1990's
> era) GPSDO use the Motorola Oncore VP receiver. It was, and still is, a
> famous GPS timing receiver. Later, many GPSDO evolved to use the
> Motorola/iLotus M12 receiver.
>
> The new Synergy SST-6T is a clever combination h/w and s/w that turns a
> uBlox 6T & PIC into a PCB that is both h/w and s/w compatible with an
> M12. It's a drop-in replacement. But as such, it won't work in a device
> that is uses an old Motorola UT/GT/VP receiver.
>
> I suggested that they also come up with a board that is VP compatible,
> but you realize the number of 15-year-old Oncore VP's in the field is
> probably not that high. It would make an excellent labor-of-love project
> to create a VP-compatible uBlox 6T board, but it's probably not
> something you can make a business case for.
>
> /tvb
>
> ----- Original Message -----
> From: "paul swed" <paulswedb at gmail.com>
> To: "Discussion of precise time and frequency measurement"
> <time-nuts at febo.com>
> Sent: Thursday, December 20, 2012 7:41 AM
> Subject: Re: [time-nuts] SSR-6t Connector
>
>
>> Not to hijack the thread. I purchased a ssr and have not rcvd it yet.
>> But
>> my simple interest is to if needed replace the rcvr in my z3801. There
>> have
>> been threads on time-nuts that these rcvrs do fail with age.
>> My belief is that though the connector on the 3801 may be different
>> and it
>> is 5V, essentially connecting the 1 pps TX RX data and power should
>> allow
>> this to replace the older rcvr.
>> Am I on the right track?
>> As a longer term goal and question does this new rcvr actually improve
>> a
>> 3801s stability?
>> Thanks
>> Paul
>> WB8TSL
>>
>> On Thu, Dec 20, 2012 at 10:16 AM, David Martin <
>> drmartin at ivietechnologies.com> wrote:
>>
>>> I had a Motorola M12+ all hooked up with a RF pigtail and data header
>>> so I
>>> just unplugged the Motorola and plugged in the SSR-6t.
>>>
>>> The data connector was purchased from digikey several years ago and
>>> the
>>> details have been lost in the dust.
>>>
>>> However it looks like
>>>
>>> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A33546-ND
>>>
>>> I'm unhappy with the one I'm using as the contacts spring pressure is
>>> weak
>>> against the connector pin -- I will have to consider looking for a
>>> more
>>> "firm" fitting data connector.
>>>
>>> The RF pigtail was also obtained years ago from data-alliance.net -
>>> their
>>> P3B adapter cable.
>>>
>>> See
>>>
>>> http://www.data-alliance.net/servlet/-strse-800/MCX-BNC-female-Adapter/Detail
>>>
>>> - Sent from my iPhone -
>>> Please Reply To
>>> David Martin
>>> drmartin at ivietechnologies.com
>>> 801-372-0978
>>>
>>> Just curious,
>>> what connector/pigtail/adapter board did you use to access the 2x5
>>> 1.27mm
>>> pitch connector on your SSR-6T.
>>> Thanks,
>>> Dale NV8U
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


-- 
"Neither the voice of authority nor the weight of reason and argument
are as significant as experiment, for thence comes quiet to the mind."
De Erroribus Medicorum, R. Bacon, 13th century.
"If you don't know what it is, don't poke it."
Ghost in the Shell


Dr. Don Latham AJ7LL
Six Mile Systems LLP
17850 Six Mile Road
POB 134
Huson, MT, 59846
VOX 406-626-4304
www.lightningforensics.com
www.sixmilesystems.com



_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there. 




More information about the time-nuts mailing list