[time-nuts] Morion MV89 output level?
Erno Peres
ernieperes at aol.com
Thu Feb 9 06:31:51 UTC 2012
Hi Nevell,
FYI my one delivers almost +5dBm on 50 Ohm.....Ref Voltage +4,86 Volt.
Rgds Ernie.
-----Original Message-----
From: Scott Newell <newell+timenuts at n5tnl.com>
To: time-nuts <time-nuts at febo.com>
Sent: Thu, Feb 9, 2012 5:16 am
Subject: [time-nuts] Morion MV89 output level?
Got my replacement FE-5680 and a MV89 in from Nichegeek. I figured
'd better power up and check the MV89 before I let 'em know
verything was ok. The MV89 is warming up nicely, the current is
own to 290 mA (and still dropping), but the output seems low; about
0 mV RMS as measured on a scope with a 10Meg 10x probe. (Datasheet
pec is +7 +/- 2 dBm.) The output is too weak to reliably trigger my
345A counter.
The reference voltage measures 4.90 VDC.
If anyone can make a quick measurement on their MV89, I'd appreciate it.
hanks!
ewell N5TNL
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
More information about the time-nuts
mailing list