[time-nuts] Getting my Rockwell D200 GPS to work
bownes
bownes at gmail.com
Sat Jan 7 00:48:58 UTC 2012
Step one...is the antenna in a location where it can see they sky?
Sorry if it is a stupid question but you already said it was plugged in. :)
On Jan 6, 2012, at 19:24, "Don Lewis" <dlewis6767 at austin.rr.com> wrote:
> Can someone please give me some pointers (my first time with a GPS module).
>
>
>
> A little hand-holding, pls.
>
>
>
> I bought three of these Rockwell D200 GPS receivers. (It's little GPS PWB
> with an antenna connector and pins for connecting to the RS232- PC)
>
>
>
> All three 'appear' to work the same way (no apparent capture of satellites).
>
>
>
> Here's what I have:
>
>
>
> 1. VisualGPS installed and running.
> 2. A small USB-RS232 card installed and appears to be operational.
> 3. Small GPS active antenna plugged in.
> 4. VisualGPS monitor just repeatedly displays:
> $GPGGA,,,,,,0,00,,,,,,,*66
> 5. I think I understand this to be NMEA code to mean no satellites have
> been acquired.
> 6. The Rockwell D200 draws ~180ma (5V) with no antenna and ~190ma with
> the small active antenna plugged in.
>
>
>
> What am I doing wrong? Other than maybe cheap china gps' and antenna???
> But it is what I could afford and thought it would be cheap to learn on.
>
>
>
> Thanks for your help.
>
>
>
> -Don
>
>
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list