[time-nuts] FE-5680A Mechanical Question
Bob Camp
lists at rtty.us
Fri Jan 13 17:32:01 UTC 2012
Hi
I think it's pretty safe to guess that none of these units got reset in the
field. What ever the end application, it just let them free run. Based on
the number or "pps missing" units, I'd also bet it used the dirty 10 MHz
output rather than the pps.
Bob
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Chuck Forsberg WA7KGX N2469R
Sent: Friday, January 13, 2012 12:05 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] FE-5680A Mechanical Question
Both of my units came with a stored preset of 0.
Giving the second unit an offset of 0 results in an
84 second period for a 360 degree phase procession
relative to a Thunderbolt's 10 MHz output. Call it
100 instead of 84 and we get 1e-9. Measure the
distance to the Moon within a foot or two.
On 01/12/2012 03:57 PM, EWKehren at aol.com wrote:
> Nigel
> I did not program it, it had its original setting and it is 9.99999999944
> which is -5.6 E-11, within 10 MHz which is within spec. Once I have some
> aging I will look at Voltage sensetivity.
> Bert Kehren
>
>
> In a message dated 1/12/2012 6:22:02 P.M. Eastern Standard Time,
> GandalfG8 at aol.com writes:
>
> Hi Bert
>
> Could you clarify something for me please, before you started your tests
> did you program the unit to be close to 10MHz or did you leave it as
> received, and if so what is the actual frequency and is it stable?
>
> regards
>
> Nigel
> GM8PZR
>
>
> In a message dated 12/01/2012 21:50:28 GMT Standard Time,
EWKehren at aol.com
>
> writes:
>
> I hear all these ideas from paper tigers. How about building something
> and
>
> report on it. I can do a Shera for $ 40 and add a $ 20 GPS. And it
> works.
> I did fail to mention that I also have retrace data. Over the test
period
> I
> had at least 10 power outages from seconds to a couple of hours. The Rb
> goes right back to 1 E-12. It would be nice if some one independent
does
>
> a
> test on aging, maybe I was lucky and got a particularly good unit.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
--
Chuck Forsberg WA7KGX N2469R caf at omen.com www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 503-614-0430
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list