[time-nuts] FE-5680A what is the size of the Torx??
Paul F. Sehorne
paul at sehorne.org
Tue Jan 17 23:24:33 UTC 2012
Nope. Looked at them with a jeweler's loupe. They are Torx.
On 1/17/2012 5:13 PM, Peter Gottlieb wrote:
> Most likely they are 1/16" hex.
>
>
> On 01/17/12, Chris Albertson<albertson.chris at gmail.com> wrote:
>
> No need to buy a tool. They drill out really easy but you can also
> simply punch them out. There are no nuts on the back. The screws
> bite directly into the fiberglass PCB. Mine were T-16 but many
> people report they are hex not torx. Maybe it depends on what kind
> of screw they had around the day it was built.
> On Tue, Jan 17, 2012 at 2:42 PM, Paul F. Sehorne<[1]paul at sehorne.org>
> wrote:
> >
> > I received my two FE-5680s today. The first thing I want to do is
> inspect
> > the insides. The smallest Torx I have is a too-big T-8. What size
> is
> > needed? I'll need to do an internet search for the correct size.
> >
> > Thanks,
> > Paul
> >
> > _______________________________________________
> > time-nuts mailing list -- [2]time-nuts at febo.com
> > To unsubscribe, go to
> > [3]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> --
> Chris Albertson
> Redondo Beach, California
> _______________________________________________
> time-nuts mailing list -- [4]time-nuts at febo.com
> To unsubscribe, go to
> [5]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> References
>
> 1. mailto:paul at sehorne.org
> 2. mailto:time-nuts at febo.com
> 3. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> 4. mailto:time-nuts at febo.com
> 5. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list