[time-nuts] FE-5680A - screws in my unit are 1/16" hex

[Paul F. Sehorne]

Peter,
After your message below, I took another look at the screws in my 
FE-5680A.  EGG ON MY FACE.   They are hex and 1/16" works just fine.  I 
also tried 1.5mm (too small) and 2mm (too large).

Paul

On 1/18/2012 9:29 PM, Peter Gottlieb wrote:
> Looked at mine with a loupe as well and they are definitely hex.
>
> That would seem to establish that they use at least two different 
> kinds of fasteners.
>