[time-nuts] Morion MV89A pics

Bob Camp lists at rtty.us
Sat Jun 9 13:19:11 UTC 2012


Hi

Yakov is a pretty good guy. I doubt he would ever sell the whole company to FEI. I believe there is still a Russian government provision in his charter that effectively keeps 51% of the ownership Russian. 

Bob

On Jun 9, 2012, at 7:25 AM, Azelio Boriani wrote:

> I have seen that FEI invested an 36% in 2004 and then reduced the
> investment in 2007...
> The Morion president Dr. Yakov Vorokhovsky visited my company one year ago,
> we were buying the MV189 OCXO.
> 
> On Sat, Jun 9, 2012 at 11:37 AM, Rob Kimberley
> <robkimberley at btinternet.com>wrote:
> 
>> Bob,
>> 
>> FEI as far as I know do own Morion. That's certainly what I was told when I
>> worked for Zyfer (also owned by FEI).
>> 
>> Rob K
>> 
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>> Behalf Of Bob Camp
>> Sent: 09 June 2012 02:15
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] Morion MV89A pics
>> 
>> Hi
>> 
>> I do not believe FE owns Morion. The most certainly own space in the Morion
>> factory. Last time I was there I saw the space.
>> 
>> Bob
>> 
>> On Jun 8, 2012, at 9:00 PM, Arthur Dent wrote:
>> 
>>> I just got an DOXCO made by Frequency Electronics, Inc., so the first
>>> thing I did was remove the screws from the outer cover to open it up
>>> and check out the insides. Once I removed the foam so I could see the
>>> oven, I had the feeling of deja vu. but I'd never owned one of these
>>> units before. I realized that it was exactly the same as the oven
>>> inside a Morion MV89A that I've seen on this list and where FEI
>>> apparently owns Morion it wasn't too much of a surprise. The OXCO part
>>> number is FE-489A which is pretty close to the Morion MV89A part
>>> number as well. Attached is a photo of the FE on the left and the photo
>> of
>> the Morion from this list on the right.
>>> 
>>> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A89A1024.jpg
>>> 
>>> Here is a view of the entire board which has a DB-9 connector to
>>> connect to the outside world. In the foreground is the output which
>>> converts the 5Mhz output of the oscillator to 15Mhz that goes to the
>>> SMA connector. The size of this OXCO is exactly the same as the 5650A
>> rubidium oscillator by FEI.
>>> Adjustment may be digital and/or analog.
>>> .
>>> http://i906.photobucket.com/albums/ac262/rjb1998/FE-489A606-1.jpg
>>> 
>>> -Arthur
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the time-nuts mailing list