[time-nuts] 0MHz distribution...NOT

[Chuck Forsberg WA7KGX N2469R]

A month or two ago I had sketched out a simple distribution amp
for my 10 MHz reference.   In the meantime I became somewhat
disillusioned about my FE-5680a standards.   So I removed the
FE-5680a and disconnected its power supply from the box that
holds the Thunderbolt, power supply, and big line filter.

I decided to try daisy-chaining the Thunderbolt's 10 MHz output.
I have plenty of hardware left over from the days of 10BaseT networking.

So I have the Thunderbolt going to a BNC T on the back of my FlexRadio 1500,
hence to my Advantest U3641 spectrum analyzer, and finally to the external
reference on my Racal-Dana 1992 nanosecond universal counter.  That end
has a 50 ohm termination on the other side of its T connector.

All three devices seem happy with the 10 MHz they are receiving.

-- 
Chuck Forsberg WA7KGX N2469R     caf at omen.com   www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
   Omen Technology Inc      "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231   503-614-0430