[time-nuts] IOTECH 488 EPROM

Dale J. Robertson dale at nap-us.com
Sun Mar 18 12:05:38 UTC 2012


If it's a 44pin plcc I can burn it.
Dale Robertson
NV8U


-----Original Message-----
From: "Joseph Gray" <jgray at zianet.com>
Sent: Sunday, March 18, 2012 3:18am
To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
Subject: [time-nuts] IOTECH 488 EPROM

The text file accompanying the EPROM file on KO4BB's site mentions
using this EPROM image with a NI controller. I have a NI GPIB-232CV-A.
Can I use the image with this controller? If so, I assume that I then
have the equivalent of an IOTECH controller?

I partially disassembled my GPIB-232CV-A and from peering between the
boards, it looks like the EPROM is a PLCC. I can't burn one of those.
If I can use this image with my controller, can someone burn a chip
for me? I'll pay for the chip and shipping, of course.

Joe Gray
W5JG

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.





More information about the time-nuts mailing list