[time-nuts] 57600 baud rate with Basic???

[Ed, k1ggi]

Hi Corby,
Before you go to all the trouble of venturing into unfamiliar waters, code a
few inps and outs to poke a 2 into the uart divisor latch and give it a try.
I just tried poking 3 to pull in some 38.4k NMEA strings and its fine.
Using v3.22 and W7/32.
Ed

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of cdelect at juno.com
Sent: Tuesday, October 09, 2012 1:44 PM
To: time-nuts at febo.com
Subject: [time-nuts] 57600 baud rate with Basic???

Hi,

I'm currently using a GWBasic program at 9600 Baud to get 1 second T.I.
data (12 digits) from an SR620 counter, display the reading , put the
reading into a file, name the file sequentialy, and either save or delete
the file via a function key.

I'm switching to a new counter that outputs at 57600 Baud (9 digits).

Is there a version of Basic I can use that would support that 57600 Baud
rate?

Thanks,

Corby
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.juno.com/TGL3141/507462c97549762c919e3st02duc

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.