[time-nuts] Question on OSA8600 Oscillators

[Ulrich Bangert]

Gentlemen,

I have currently two OSA 8600 in my house for testing purposes. One of them
says "VAR 02" on the label and has an explanation of the pinning of the
D-Sub connector on it. I wired a cable with that pinning and made my the
first measurements with this oscillator. 

The second oscillator says "VAR 60" and is different from the first in that
the enclosure is abt. 2" longer than the first one due too an additional
piece of tubing that is connected with some screws to the original body
which is the same size as the first oscillator. When I connect my cable to
the second oscillator it draws no current from the power supply and no
output signal is available. Does anyone of you have the pinning for the
second type of OSA 8600 available?

The serial # is 822, the supply voltage is 24V and there is additional
information on the label saying

A0320666

and

QNM 58A

which I am not aware for what it stands for.

Thanks in advance for your help  

Ulrich Bangert
www.ulrich-bangert.de
Ortholzer Weg 1
27243 Gross Ippener