[time-nuts] Locked onto LORAN 8970 GRI Monday AM

[paul swed]

We can only dream. But will take what I can get for as long as I can get
it. It sure in the heck kicks wwvb's capabilities.
Regards
Paul

On Mon, Feb 4, 2013 at 6:20 PM, J. Forster <jfor at quikus.com> wrote:

> Great. Now if the transmissions continue and the format doesn't change!
>
> -John
>
> ==================
>
>
> > Boy LORAN austron2100 and 2100f and GPS HP3801are tracking really well.
> > The
> > Austrons are 1.5-2.0 E-12. Pretty much getting at there limits after 5
> > hours.
> >  Regards
> > Paul.
> >
> > On Mon, Feb 4, 2013 at 11:31 AM, paul swed <paulswedb at gmail.com> wrote:
> >
> >> Stan indeed the srs700is locked and stabilizing. Fired up the austrons
> >> also and they are locking. So is the LORAN workday 1000 to 1700 EST?? Or
> >> is
> >> it a work week 1000 Monday to 1700 Friday?
> >> Regards
> >> Paul.
> >>
> >>
> >> On Mon, Feb 4, 2013 at 10:33 AM, paul swed <paulswedb at gmail.com> wrote:
> >>
> >>> Yes indeed they are on the air.
> >>> Must have had to have the coffee while the solid state finals warmed
> >>> up.
> >>> Looks like a 10am start of the day, like banks.
> >>> Paul
> >>> WB8TSL
> >>>
> >>>
> >>> On Mon, Feb 4, 2013 at 10:05 AM, Stan, W1LE <stanw1le at verizon.net>
> >>> wrote:
> >>>
> >>>> Have had lock onto slave Seneca for about 20 minutes on GRI 8970.
> >>>> compared to GPS/DO: phase offset 3.6 degrees, freq offset 6E-11
> >>>>
> >>>> Stan, W1LE   Cape Cod
> >>>>
> >>>>
> >>>> On 2/4/2013 9:48 AM, paul swed wrote:
> >>>>
> >>>>> Don't hear LORAN today
> >>>>>
> >>>>> On Sun, Feb 3, 2013 at 6:18 PM, Stan, W1LE <stanw1le at verizon.net>
> >>>>> wrote:
> >>>>>
> >>>>>  Hello The Net:
> >>>>>>
> >>>>>> was able to get a lock onto this GRI but not the master station.
> >>>>>>
> >>>>>> GRI 9007 is the EIDI chain with slaves at BO, Norway, Jan Mayen, and
> >>>>>> Vaerlandet also in Norway.
> >>>>>>
> >>>>>> Lock was short lived, but I will continue to monitor tonight.
> >>>>>>
> >>>>>> equipment:
> >>>>>> 2 orthogonal delta loops, top terminated,
> >>>>>> the SRS FS700 RX,
> >>>>>> Austron multifilter (multcoupler 1X4)
> >>>>>>
> >>>>>> Stan, W1LE Cape Cod
> >>>>>> ______________________________****_________________
> >>>>>> time-nuts mailing list -- time-nuts at febo.com
> >>>>>> To unsubscribe, go to
> >>>>>> https://www.febo.com/cgi-bin/****<https://www.febo.com/cgi-bin/**>
> >>>>>> mailman/listinfo/time-nuts<htt**ps://www.febo.com/cgi-bin/**
> >>>>>> mailman/listinfo/time-nuts<
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> >>>>>> >
> >>>>>> and follow the instructions there.
> >>>>>>
> >>>>>>  ______________________________**_________________
> >>>>> time-nuts mailing list -- time-nuts at febo.com
> >>>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> >>>>> mailman/listinfo/time-nuts<
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> >>>>> and follow the instructions there.
> >>>>>
> >>>>>
> >>>> ______________________________**_________________
> >>>> time-nuts mailing list -- time-nuts at febo.com
> >>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> >>>> mailman/listinfo/time-nuts<
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> >>>> and follow the instructions there.
> >>>>
> >>>
> >>>
> >>
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> >
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>