[time-nuts] Lady Heather numbers

Garren Davis garren.davis at qlogic.com
Tue Feb 26 11:31:36 EST 2013


Bob,

To me it looks like a d followed by an e just enables the DAC control voltage. Am I missing
something? Does it do a calibration of some kind?

Thanks for all your help.

Garren


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of Bob Camp
Sent: Monday, February 25, 2013 4:24 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Lady Heather numbers

Hi

Useful link:

http://www.ke5fx.com/heather/readme.htm

For a screen command list hit space. Poking around at them can be fun!

To get into the OCXO calibration hit d followed by e. Only works after you are locked up.

Bob

On Feb 25, 2013, at 6:45 PM, J. L. Trantham <jltran at att.net> wrote:

> I am not familiar with the OCXO Calibration Routine.  Can you elaborate?
>
> I am a 'newbie' with Lady Heather.
>
> Thanks.
>
> Joe
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Bob Camp
> Sent: Monday, February 25, 2013 11:35 AM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] Lady Heather numbers
>
> Hi
>
> Based on a very short display time, nothing looks seriously broken.
> I'd suggest running the OCXO calibration routine at some point.
> Everything is still warming up / settling out for the first week or
> two, so who knows where it will finish out at.
>
> Bob
>
>
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> On Behalf Of Garren Davis
> Sent: Monday, February 25, 2013 12:00 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] Lady Heather numbers
>
>
> Hi,
>
> I have been playing with my thunderbolt and Lady Heather over the
> weekend. I hope it's ok that I attached a screen dump of what I have.
> Can anyone comment on the picture. It's been running less than a day
> and I don't know if what I have would be considered good as far as
> accuracy and stability is concerned.
>
> Thanks.
>
> Garren
>
>
>
>
>
>
> ________________________________
>
> This message and any attached documents contain information from
> QLogic Corporation or its wholly-owned subsidiaries that may be
> confidential. If you are not the intended recipient, you may not read,
> copy, distribute, or use this information. If you have received this
> transmission in error, please notify the sender immediately by reply
> e-mail and then delete this message.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


________________________________

This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.



More information about the time-nuts mailing list