[time-nuts] HP 5370B Leds pulsing slowly, buttons selecting normally, PB ...
Bob Smither
smither at c-c-i.com
Sun Jul 7 13:07:44 EDT 2013
On 07/06/2013 07:55 AM, Adrian wrote:
> Mark,
>
> I wouldn't replace a 20V cap with an only 10V rated one, especially when the
> nominal working voltage is alrady 10V. That would be a very bad idea.
> You can always use caps with higher voltage ratings as replacements which is
> good for reliability, but don't do the other way.
>
> The exotic values HP was using (17.000 uF) are probably near impossible to
> find, except old stock (not so great with electrolytics) or you go to a
> manufacturer and get them custom made.
There are several on ebay.com. Search for "17,000 ufd." Sprague 17,000 ufd at
20 Volts, CD 17,000 ufd at 30 Volts, etc.
--
Bob Smither, PhD Circuit Concepts, Inc.
=========================================================================
No man's life, liberty, or property are safe while the legislature
is in session.
--Mark Twain (1866)
=========================================================================
Smither at C-C-I.Com http://www.C-C-I.Com 281-331-2744(office) -4616(fax)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smither.vcf
Type: text/x-vcard
Size: 140 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/time-nuts/attachments/20130707/93879de4/attachment.vcf>
More information about the time-nuts
mailing list