[time-nuts] Spectrum Analyzer Suggestions
K3wry
k3wry at aol.com
Sun Jul 14 10:56:50 EDT 2013
Take a look at the RIGOL analyzer. You can get this new one for about the same money
Dr Joe PALSA
804-350-2665
Sent from my iPhone.
On Jul 14, 2013, at 1:18 AM, "Mark C. Stephens" <marks at non-stop.com.au> wrote:
Perry I have a 3585A too, The weight isn't so bad once you get used to it. :)
Mines on a rack shelf that I can slide it out onto the workbench for maintenance.
Performance wise, they are fantastic for phase noise measurement using John Miles's Phase noise software.
Although a little slow, It is pretty nice to see what's going on down at 10 Hz.
I really can't find a replacement for my 3585A, other than the "B" model.
Also the boards come up cheap on eBay if you need parts.
I have almost a complete set of spare boards I bought for 10 bucks each.
So all in all, you got yourself a good Analyser, cheap to maintain and good specs.
Run it through the performance tests as per the manual, this SA will be a pleasant surprise for you :)
-marki
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of Perry Sandeen
Sent: Sunday, 14 July 2013 1:10 PM
To: time-nuts at febo.com
Subject: [time-nuts] Spectrum Analyzer Suggestions
List,
I just purchased a HP 3585 spec analyzer on E bay for a reasonable price. I wanted this instead of the 181 series as the range was more to what I’d be using and it was of a newer vintage. The 3585a goes from
10 Hz to 40 MHz which is a most useful range for my purposes. so far, so good.
The problem is I didn’t know the beast weighed a svelte
88 pounds! Double Hernia time!
What I’d appreciate advice for a used spec analyzer in the $1,000 range that is at least much lighter. A smaller size would also be a benefit. I probably would never use it above 100 MHz. A slightly smaller screen would be OK.
Suggestions appreciated.
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list