[time-nuts] FE-5860A - R232 working but S type commands don't work.

Mark C. Stephens marks at non-stop.com.au
Sun Jun 23 10:01:56 EDT 2013


I just moved it onto the correct frequency, while trying to keep the thing in phase.
Actually, it didn't take more than 15 minutes with that software.
The difference, was dramatic to say the least.
Had me hopping around the workshop that's for sure :)
-marki
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf Of Magnus Danielson
Sent: Sunday, 23 June 2013 11:02 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] FE-5860A - R232 working but S type commands don't work.

Hi Mark,

On 06/23/2013 12:15 PM, Mark C. Stephens wrote:
> The Program, comm_5680.exe is nothing shorter than awesome.
> I was trying to work out the offset and checksum manually until I came across this program.
>
> I now have my Hadamard Deviation down from 1.15E-10 to 2.75E-12 @100 Seconds.
>
> For me I think is pretty close to as low as I can measure.

Uhm. What would make the Hadamard change like that? Frequency offset doesn't, linear drift doesn't (since it is Hadamard, first degree drift is canceled anyway) so what mechanism got banged to reduce the Hadamard?
I'm really curious!

> To whomever wrote this software, you have my eternal thanks :)

There are some good software out there, aiding us all. :)

Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list