[time-nuts] Webinar: Phase Noise & Jitter Measurements by Rohde & Schwarz

[Joseph Gray]

If it is not archived for later viewing, it would be great if someone who
recorded it would make it available for us nuts.

Joe Gray
W5JG
 On Oct 3, 2013 2:36 PM, "Mike Feher" <mfeher at eozinc.com> wrote:

> I use "antbar", which is free, to save video files. Regards - Mike
>
> Mike B. Feher, EOZ Inc.
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960 office
> 908-902-3831 cell
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Dr. David Kirkby
> Sent: Thursday, October 03, 2013 4:22 PM
> To: Electronics and Books; Discussion of precise time and frequency
> measurement
> Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by
> Rohde
> & Schwarz
>
> I suspect there is software which will just capture whatever is on the
> screen. Perhaps Google will find something.
>
> It would seem a bit dumb for R+S to produce this, let 30 or so people look
> at it, then not make it available to anyone else. That works out a lot of
> money per person looking!!
>
> I've never found the R+S site too useful for support, which is why I tend
> to
> buy HP/Agilent and not R+S stuff. But maybe one could find out from R+S if
> they intend to archive it.
>
> Dave
>
>
>
> On 3 October 2013 20:11, Electronics and Books
> <electronicsandbooks at yahoo.com> wrote:
> > I have tested the seminar this evening. Its a series of flash files with
> a
> size of 20 - 50k. They can be saved in a hurry. I could not find a audio
> file, its also one of the flash files. At the end all files are gone. Its
> not very practical to save it.
> >
> >
> >
> >
> >
> >
> > ________________________________
> >  From: Dr. David Kirkby <drkirkby at gmail.com>
> > To: Discussion of precise time and frequency measurement
> > <time-nuts at febo.com>
> > Sent: Thursday, October 3, 2013 9:35 AM
> > Subject: Re: [time-nuts] Webinar: Phase Noise & Jitter Measurements by
> Rohde    & Schwarz
> >
> >
> > On 3 October 2013 02:26, Joseph Gray <jgray at zianet.com> wrote:
> >> I won't be available when this is live. Do you know if the video will
> >> be available afterwards?
> >>
> >> Joe Gray
> >> W5JG
> >
> > Sorry, I don't know. You could ask either R+S or MW&RF. I know Agilent
> > archive their webinars, but I've never seen one from R+S or WR&RF
> > before, so I don't know if it will be archived.
> >
> > Typically these sort of things require one to enter a user name and
> > password to view, so it is not something you can record on your own
> > computer easily - if at all. It might be possible for someone else to
> > record it. I must admit I don't know what software one could use to do
> > it, but I suspect it must be technically, (though perhaps not
> > legally), possible to record it.
> >
> >
> > Dave
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>