[time-nuts] Coarse adjustment of PRS-10 with 5335A

Bob Camp lists at rtty.us
Mon Sep 2 20:14:55 EDT 2013


Hi

That of course *assumes* the firmware is there to do the time stamp in the first place. There are a lot of them out there that simply have nothing at all on the pps input.

Bob

On Sep 2, 2013, at 8:03 PM, Magnus Danielson <magnus at rubidium.dyndns.org> wrote:

> On 09/02/2013 06:27 PM, Bob Camp wrote:
>> Hi
>> 
>> 1) Because it's way more fun to do it this way
>> 2) Because some / most PRS-10's don't have the 1 pps input enabled in the firmware they have loaded into them
>> 3) Because you have more control over when you do / don't bump the frequency (you can see what's going on). 
> You don't need to use the PRS-10 internal algorithms, you can implement
> it all yourself with a little program communicating with the PRS-10,
> using it's time-stamping hardware and remote steering.
> 
> Cheers,
> Magnus
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list