[time-nuts] Practical Survey-In Accuracy?
Bob Stewart
bob at evoria.net
Mon Aug 25 18:12:08 EDT 2014
Hi Bob,
Thanks for the info. I'll have to run a long test to see what the difference is. Maybe I can capture the XYZ coordinates to the PC during the run.
Bob
________________________________
From: Bob Camp <kb8tq at n1k.org>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Monday, August 25, 2014 4:54 PM
Subject: Re: [time-nuts] Practical Survey-In Accuracy?
Hi
There are some periodic errors in GPS that only get averaged in after a >= 48 hour survey. It’s not so much a specific error level in meters as much as averaging in all the “issues”.
Bob
On Aug 23, 2014, at 7:38 PM, Bob Stewart <bob at evoria.net> wrote:
> I've had the LEA-6T sitting in survey-in mode for about 17 hours, and at this point, the u-center software says that the Mean 3D Std Dev is 0.109 meters. Given that my antenna is just a puck at the peak of the attic (never got around to adding the DIY choke-ring), has this reached the silly number phase, or should I let is simmer overnight before calling it done?
>
> Bob - AE6RV
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list