[time-nuts] Lucent KS-24361 Ref1 burnin after 1.8 weeks

paul swed paulswedb at gmail.com
Thu Nov 20 16:40:23 EST 2014


I have been snapping pix so can compare now.
Getting better.
Regards
Paul

On Thu, Nov 20, 2014 at 12:14 PM, Anthony Roby <aroby at antamy.com> wrote:

> I'll fire up my lab PC and take a more recent screenshot of my data - when
> I last looked the EFC was a straight line and PPS TI / s had settled down
> but was still noisy.
>
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of paul swed
> Sent: Thursday, November 20, 2014 10:24 AM
> To: Time-nuts
> Subject: [time-nuts] Lucent KS-24361 Ref1 burnin after 1.8 weeks
>
> As suggested by Bob and others the REF1 new out of the box needs time to
> burn in. At 1.8 weeks now I can see the EFC settling down towards a
> straight line. To start I was about 800 counts per day rising. Today 150
> and rising. So it is slowly shifting towards what a z3801 as an example
> will do.
> Also ultimately it will look like an example Antony sent me. Simply noisy.
> The 3801 is fairly smooth.
>
> So I sense my earlier concern of a "Bad box" is wrong. Pretty happy about
> that.
> Regards
> Paul
> WB8TSL
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list