[time-nuts] Lucent KS-24361 24V DC power requirements

[Bob Camp]

Hi

A bit over 2A for the pair at turn on. About 1A for the pair after warmup.

Bob

> On Nov 21, 2014, at 6:23 PM, Graham <planophore at aei.ca> wrote:
> 
> Just to clarify, each unit (no more than 2 and steady about 1.1A) or both units together?
> 
> cheers, Graham ve3gtc
> 
> On 2014-11-21 12:50, Anthony Roby wrote:
>> I have been using a Universal 24V 5A DC Switching Power Supply from eBay.  I have not seen my units draw more than 2A each - steady state is about 1.1A.
>> 
>> Anthony
>> 
>> -----Original Message-----
>> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of planophore at aei.ca
>> Sent: Friday, November 21, 2014 11:25 AM
>> To: Discussion of precise time and frequency measurement
>> Subject: [time-nuts] Lucent KS-24361 24V DC power requirements
>> 
>> Good day all,
>> 
>> I have been following the discussions as best as I could. I recell seeing the question asked or at least theorized as to what is the power requirements of these units - either individually or together.
>> 
>> I have reviewed all messages or at least all that I can find in these threads but I couldn't find a definitive answer unless of course the answer is in one of the responses hiding where I haven't looked.
>> 
>> I purchased a set of these modules and they are currently in transit but I don't have a 24V DC supply at the moment.
>> 
>> So, in order to try and get ahead before the arrival of these modules I would like to at least plan out if not get a suitable power supply ready. I don't want to over specify by too much and worse yet, under specify.
>> 
>> Has anyone actually made any power used measurements of these modules? 2A average, 4A peak? Somewhere inbetween or more?
>> 
>> cheers, Graham ve3gtc
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.